"THEGA" Engine Performance Enhancer
AQuartz Nano Titanium Technology for Car Engine
We offer a wide range of products based on Titanium materials with nanotechnology.
THEGA is the world's leading luxury product is applied to reduce friction and wear lands from moving parts such as engines or gears
with our leading-edge Titanium and CNT nanotechnology.
It is the most effective oil additive to repair and recover at lowest cost in case of high repair cost due to high fuel cost,
engine wear, horsepower loss, noise, vibration and performance degradation.
It protects the engine from destructive elements that degrade engine performance such as excessive friction, extreme pressure,
heat, cold, corrosion, dust, carbon deposits and dry start, etc.
By preventing and reducing these factors, it can make fuel expenses to save more than 15% and horsepower to increase more than 10%.
50 nanometer Titanium and CNT compounds have an outstanding ability to withstand engine loads and reduce friction,
and also have the ability to clean engine oil by itself.
With complete sealing the gap between the cylinder and the piston of the combustion chamber, it stops a gas leak during compression,
and prevents the inflow of oil into the combustion chamber, resulting in perfect combustion.
Besides, it reduces the soot of an exhaust gas by strong combustion catalysis of nano platinum.
Therefore, it is an economic product because it does not need to change engine oil up to 100,000kms by the self-cleaning.
:: ABOUT FUNCTIONS OF THEGA ::
The engine of an automobile was developed to deliver power to rotate a wheels.
It is almost impossible to deliver 100% energy to the wheel rotation without loss of energy input
because there are many causes and factors that interfere with energy delivery.
These energy interruption factors deteriorate the fuel economy of the vehicle.
What are the causes and factors of energy loss?
Simply put, there are friction, noise, the engine pressure leakages, and a bad thermal conduction , and old oil sludges, etc.
Although engine oil is used to reduce these factors, good engine oil is very expensive,
and it can not cure damaged engine wall by friction, and its expected effects are not satisfactory.
THEGA is designed to solve them to maximize an energy efficiency and to cure damaged engine wall by friction.
Let's check how THEGA solves these bad factors.
1. How can THEGA reduces an engine friction?
- With the nano size of the carbon nanotube (CNT) by cutting-edge technology,
it maximizes the lubrication function with the chemical stability.
- This super lubrication function of CNT reduces friction and abrasion between an engine wall and piston rings.
- By reducing the friction, consequentially it reduces engine noise and frictional heat generation, resulting in improved fuel economy,
and in lower overall maintenance costs and longer engine life.
- Overload due to friction, noise, vibration, etc. are solved to maintain the best performance efficiency.
- Rapidly self-repair cylinder abrasion, re-seal the cylinders heads with metal titanium.
- With more surface area (20m2/g), there is increased metallic binding titanium force.
2. How can THEGA reduce an engine pressure leakage?
- THEGA makes rapid the wear parts of the cylinder wall metallizing and repairing.
- By forming the coating film of THEGA on the metal surface of the engine,
it prevents the cylinder wall and the piston from pressure leaking, and increases engine output (horsepower), engine performance
and wear resistance and it makes complete combustion.
3. How can THEGA solve the bad thermal conduction?
- One of the important functions of the engine oil is the cooling function inside the cylinder and piston,
- Nanoparticles of THEGA make to reduce the internal heat of the engine with excellent thermal conductivity and excellent cooling power.
- Tthere is no restriction on temperature and humidity inside engine.
4. How can THEGA solve the old oil sludges?
- It contains special anti-corrosion and cleaning agents that can effectively remove sludges and carbon deposits to reduce fuel consumption.
- It has the ability to clean engine oil by itself with Self Cleaning Effect, so you do not need to change engine oil up to 100,000km.
- It can also prevent acid erosion of the engine by its unique acid inhibitor.
- It does not increase the viscosity of the existing engine oil, maintains dispersed state at all times without settling.
- Combustion catalyst activity of the nano-platinum and titanium reduces exhaust emissions through complete combustion.
:: KEY BENEFITS ::
1. Contains unique active 10~50 nano size level metallic compounds.
- THEGA is a secure oil additive that does not affect the its own engine oil without interfering a oil filter.
- 10 ~ 50 nm THEGA particles can pass through the oil filter without deteriorating engine performance with adhering gunk & fouling to the filter.
※ Comparison : USA MOTOR UP: 3nm, Microlon : 5 nm
- Maximum effect with minimum addition : Only 100ml THEGA per 4 liters engine oil is sufficient to work. (2 ~ 3% of the volume of an engine oil)
※ Comparison : USA MOTOR UP, Microlon : 240ml per 4 liters engine oil.
2. The layer of the cylinder wall coated metallic compounds does not get coagulated or oxidized.
- When the engine is running, the temperature inside the cylinder is about 400 degrees.
Because most of regular chemical oil additives that made of graphite, Teflon, molybdenum compounds
and hydrocarbons can not withstand such high temperatures, and they are oxidized or solidified or evaporated thus their effects is very short.
But because the metallic compounds of THEGA are not oxidized or solidified, their effects be able to maintained for a long time.
- The surface area of 1 gram of metal nano powder is 20m2 / g, which is very large and the surface reaction force is good,
so that the wear part of the engine and the strong metal bonding are performed quickly.
- Most engine wear occurs during dry start (without initial start-up and warm-up), but THEGA metal nanoparticles and special lubricating membranes
provide excellent lubrication and reduce engine wear.
- You do not need to change engine oil up to 100,000 km, and if you have changed the engine oil, you should add a new THEGA into.
- It reduces engine vibration and noise.
- Increase engine output (horsepower): increase 3 ~ 12 horsepower depending on the decrepitude of the vehicle.
- Reduce average fuel consumption by at least 10%, and up to 35% depending on the decrepitude of the vehicle.
- Reduce particulate soot emissions : at least 10% ~ up to 80% depending on the decrepitude of the vehicle.
- Remove existing oil sludge inside the engine
- Outstanding low temperature startability in winter (excellent starting performance at minus 25 ° C)
- Helps to extend the life of engine oil by preventing oxidation of existing engine oil.
- Unlike conventional chemical additives, it is a mixture with 100% synthetic oil, so there are no side effects (Meritz's 1 billion damages insurance).
:: How to direct confirm the effects of an engine additive after use ::
1. How to check if particulate soot emissions is reduced.
- If you need to check whether the soot emissions is reduced after you put THEGA, you do not have to go to the inspection office.
- After you start the engine, try to block the exhaust muffler vent lightly with a white towel, and you can find out how much it has soot on.
::: Photo of soot reduction result :::
:: Simply check the amount of soot on the towel before and after THEGA use. ::
::: Photo of the result of fuel efficiency increase :::
After driving more 400 kms, confirm the trip gauges and then you will realize the average mileages have been better increasing.
:: Check the gauge to see how much the fuel economy has increased before and after the THEGA use ::
- Result : Significant fuel reduction, saving ratio up to 15%
Try to check your car's trip gauge, you can see that the engine additive is actually working.
After use any engine additive, if increased fuel-efficiency is less than 5% or there is no difference,
you were deceived by false and exaggerated advertisement
= View the result of the Trip Display before and after use =
- In the past, almost consumers had no choice but to trust only the wrong certificate without verification because they had no Trip gauge for measuring fuel consumption.
- Nowadays, due to science development, tripgauge was born, so it needs to be used to measure the fuel efficiency of your own car.
- But, most companies do not say that you can see the result of their oil additive used if you confirm your TRIP gauge.
The reason is the actual result of their fuel consumption is poor or insignificant though they have certificates.
- However,we proud to say that you confirm the actual fuel economy improvement results with your own Trip Computer after THEGA used.
- Do not need to trust the test report no more and try to compare with their certificates using your Trip Computer Gauge, and the result will only be known.
- The easiest, reliable, and scientific way to check for fuel economy improvements with your trip gauge is to review it yourself.
:; CHEMICAL PROPERTIES ::
* Chemical Mixture : Synthetic Oil dispersion, Hydrogenated and Others, Ethyleneglycol Monobuthylether, Ti, Pt, etc.
* Color : Brown Transparent with white sediments.
* Odor : Engine Oil Odor.
* Available Container : Any plastic bottle.
* Viscosity: 12.18 cSt @ 100℃
* Flash Point : ≥220 °C (Open Cup)
* Auto-Ignition : ≥250 °C (Open Cup)
:: THEGA COMPOSITIONS ::
- Carbon Nanotube, CNT -
The 21st century new material, chosen as the top ten in technology of the future :
It has excellent heat and electric conductivity, mechanical strength, chemical stability and lubrication.
- Nano Platinum, Nano Titanium -
Excellent catalytic properties, High reactivity, Uniform size control technology, Excellent dispersibility.
==: Comparison of ingredients with other products :==
Types of Fuel
Metal (Copper, Nickel Alloy) Nano powder
Gasoline / LPG / Diesel
Nano Tec Co., Ltd.
Motor Up Engine Treatment
Ultrafine polymeric materials,
Metals in the form of 3-5 micron Resin
Gasoline / LPG / Diesel
Motor Up Micron
Synthetic hydrocarbons and mineral compounds
Gasoline / LPG / Diesel
Hankook Tire Co., Ltd, DaeLim Co.
CERAMIC Engine Protection
Organic molybdenum compound
Gasoline / LPG / Diesel
Synthetic oil-soluble oil additive
Gasoline / LPG / Diesel
LIQUI MOLY Germany
THEGA Engine Enhancer
Carbon Nanotubes (CNT), Titanium (Ti),
Gasoline / LPG / Diesel
SEEUM Co., LTD.
= DIRECTIONS =
※ Can be used for all gasoline, LPG, diesel and electronic vehicles. Also used for various machines to reduce friction, such as gears, wheels, etc.
※ Can be mixed with any type of engine oil.
1. Shake well until the white particles that have settled under the bottle disappears.
2. Open the cap of the engine oil inlet, then pour it through the inlet.
3. Let the bottle upside down on the engine oil inlet and wait until it is completely empty.
4. After the whole liquid is poured, close the oil inlet cap.
5. Once you add it, the effects last over 100,000 kms, after the 100,000 kms, re-add it with engine oil change.
6. If engine oil shortage occurs, fill the shortage amount with THEGA, you can feel superior effects.
※ When your steering wheel is too stiff or heavy, add small amount and then you feel it light.
※ You can also use it for automatic transmission for its smoothing works.
= DOSAGE =
1. Minimum required amount : 2.5~3% of an engine oil volume : ex) one 100ml bottle for 4 liters engine oil.
2. If you inject more than the minimum required amount, you can get better results.
3. When the contents are not well mixed in the cold winter, put them in a warm place and mix them.
4. Until the white precipitate disappears from the bottom of the bottle, shake and mix it before use THEGA.
5. After driving at 100,000 Kms or an engine oil change, you should add TheGa in order to keep the effects again.
::: STORAGE :::
- Avoid direct sunlight and sore in a cool dry palce.
- Keep it away from flammable substances
- Shelf Life: 24 months at room temperature
:: VIDEOS : THEGA ::