팝업레이어 알림

팝업레이어 알림이 없습니다.

"T-CeraPro" ceramic coating for car paint.

The world's hardness 9h ceramic car coating

OVERVIEW      : Ultra-fine nano ceramic coating that can penetrate even car glass,
The world's strongest coating agent with excellent durability and the highest hardness (9h), which leaves no marks on the car paint surface even when scratched with a fingernail or a plastic lighter.
Create a brilliant shine with outstanding protection in one single step.
TYPE / DESIGNED : Single type of liquid, Dry-Coating
Nano Ceramic Coating / Hot-Air dry with a Heat Gun or a Hair Dryer / Oil Based
APPLICABLE SURFACE : Drop it into a microfiber cloth, spread it out, and wipe it off.
Car Paint, Plastic, Steel surface, etc
FEATURES       : Create very slick surface and excellent 9h hardness protection & coverage against scratches, chemicals, weathering, semi-permanent lasting, excellent hydrophobic & contamination adherent preventing, self-cleaning.
PRICE             : Contact :
+ 82-10-8000-1626 / aqkorea@gmail.com
  • 페이스북으로 보내기
  • 트위터로 보내기
  • 구글플러스로 보내기
  • 카카오스토리로 보내기
  • 네이버밴드로 보내기
  • 네이버로 보내기
  • 텀블러로 보내기
  • 핀터레스트로 보내기

AQuartz T- CeraPro Cearmic Car Coating

AQuartz Ceramic Car Coating Agent with the World's Best Hardness of 9h

 

- Scratch Defense Test Video -

 

 

 

:: T-CeraPro provides the following Key benefits ::

 

* Suitable for finishing car paint plus plastics, wheels, leather, etc.
* The easy application method, which just rubs the surface like cleaning a table, makes it easy to coat your car in less than an hour.
* Protects against nail scratches on car door handles.
* It has the world's strongest hardness, so it protects the surface from various life scratches for a long time.
* Can be coated on any color of car paint, no stain problem of black color car even without any problems.
* Very high slipping effect and Excellent Water/Dirt Repellent effect - Long-lasting Hydrophobic effect.
* No stain surface, no water spot, no cracking, no swirl marks.
* Semipermanent lasting, easy to clean surface/self cleaning effect.
* High Deep Gloss & brightness and Color Renew.
* Anti-Stick, Anti-Dirt, Anti-Graffiti, Anti-Fingerprints, easy to clean the surface against salts, calcium, oil, grease & other contaminants.
* Weather ability and car original color retention. - Excellent chemical resistance.
* Easy to clean surface against salts, calcium, oil, grease & other contaminants.
* Stops salt efflorescence, moss & algae rejecting.
* Prevents sticking of insects and bugs, insect, flies, moss & algae rejecting.
* Preserves sale Value of a New Car.
* Preserves resale Value of a Used Car.
* It is possible to wash your car with a Automatic car washing machine after coating.
* No more need to wax or polish.
* Remaining liquid after use can be reused after storage.

 

 

:; CHEMICAL PROPERTIES ::

* Chemical Mixture : Methylhydrogenpolysiloxane, Diethyleneglycol monobuthylether acetate, Heptadecafluorodecyltrimethoxysilane, etc..
* Color : Transparent Liquid.
* Odor : Mild odor.
* pH Value : 6.0~8.0 @20°C.
* Available Container : Any plastic bottle.
* Flash Point : 60ºC (Open Cup).
* Virtually insoluble

 

 

 

:: T-CERAPRO USER GUIDE ::

 

- A must-read for a beginner with no coating experience before coating

 

 

 

 

:: Preparation Materials ::

+ Approximately 20~30ml per one complete full-sized automobile(one layer).
+ One small microfiber towel for coating liquid applying, one clean microfiber towel for surface buffing and one microfiber towel for finishing.

** Always use a soft, swirl-free, oil-free microfiber cloth when coating and polishing.**

 

1. Shake well to mix, pour 3~5 drops on the surface or the applying microfiber towel.
2. Spread it evenly on each car panel.
3. Wipe & polish contents in circular motions with DRY/CLEAN microfiber buffing towel gently until no marks left continuously.
4. Wipe all patches or streaks off from the surface with the towel turning both sides alternately.
Enough buffing/polishing is required until all patches or streaks are removed.
5. Finish by wiping down with a new microfiber towel.
6. Repeat steps 2~4, finish by wiping down with a new microfiber towel.
7. Let dry it up, it takes 8 hrs to cure at 35℃.
In below 25℃ or a cloudy weather, use a heater gun or IR heater to get a short curing time.

++ We recommend applying additional costs after the coating has dried for about a week. 2~3 layer coatings will give more thickness, durability and hardness.
** If you coat AQuartz T-Cera on top of T-CeraPro coating, you can get more perfect results.

 

::: IMPORTANT POINTS ;::
** Last curing step is very import, it will decide whether short or long lasting.
** Use a heat and the wind to get a fast curing the surface coated.
** The heat Temp. : about 50~60℃ with raising the wind, Intervals of 40~50cm
** If it is too hot(over 110℃), it makes to lose hydrophobic effect.
** When it's over 30℃, dry it by exposure to the sun if you don't have a heater.
** Completely dry with NO rain takes over 24h at 30°C. - Do not drive the car during this time.
** Dry to touch: about 8 hours / Completely dry: about 1 week(Hardness Testable)

 

**If it is colder than 25 ° C, the winter season, or the curing conditions are not favorable, we recommend to use T-Fusion Top Coating with chemical curing type of irrelevant curing temperature.

 

::: WIDE APPLICATION FOR T-CERAPRO USE :::

 

+ T-CeraPro can be coated not only on vehicle paint but also on plastic and metal surfaces,
+ Can be applied on the finished product surface of paint, stainless steel, aluminum, bronze, tin, glass tile, anodizing, plating, Polycarbonate, plastic, etc.
+ Mobile Phone glass, Home mirrors, Paint surface ( Refrigerator, Air Conditioner, Table glass, Ceramics, etc)
+ Glass, windshield surface coating is difficult to coat, so unless you are an expert, do not use it and instead coat it with T-Cera.

 

 

tcera-girl.jpg

 

tcera-girl02.jpg

 

 

 

::: REFERENCE :::

- Working Temp. : 5 ~ 35°C.
- Heat Gun Temp. : 70~80°C, Intervals of 40~50cm.
- One layer Thickness: 0.4~0.8μm

 

 

::: PRECAUTIONS :::

- Avoid mixing it with detergents or any other products.
- Do not use for other purpose.
- Wash your hands with soap and water after application.
- Don’t drink and avoid long time skin contact.
- If accidentally splashed in the eyes, flush immediately with water for at least 15 minutes.
- If accidentally swallowed, seek immediate medical attention by calling your local Poison Information Centre.
- Keep out of reach of children.

 

 

::: STORAGE :::

- Store in a cool, dark place.
- More than 24 months shelf life time if closed well and kept in average room temperature.
(-5~20 deg. : 24 months, 20~35 deg. : 12 months long).

 

Have any question?

웹에디터 시작 웹 에디터 끝
Enter Captcha Figures in order!




++ RELATED PRODUCTS ++