New Iron Cut was launched

팝업레이어 알림

팝업레이어 알림이 없습니다.

Tiramics Nano Ceramic Clear Coat

Can be direct coated on the surface without sanding or primers works

OVERVIEW          : Widely used on all kinds of steel, Stainless steel. Aluminium, Bronze & paint without any primers.
High gloss and build, good performance of leveling property, excellent 9h hard pretective: coveraging power, scratches, weathering, chemical with semi-permanent lasting.
TYPES                    : Spray, dipping
To handle this Tiramics,
A dust-free boots to paint and a heat oven equipment to dry should be prepared.
APPLICATIONS  : Can be used to replace plating solution.
Metal steel, plated and painted surface, stainless steel sheet & decoration, alloy wheel, car or motorcycle exhaust muffler, pipe lines, etc
FEATURES           : Direct coated on the all kinds of steel, plating, paint surfaces without sanding or primer works / IPA based, no odor, rust prevention, deep gloss, high hardness over 9h, color retention, water beading effect, high slipping, anti-dirt & graffiti
PRICE                : Contact :
+ 82-10-8000-1626 /
  • 페이스북으로 보내기
  • 트위터로 보내기
  • 구글플러스로 보내기
  • 카카오스토리로 보내기
  • 네이버밴드로 보내기

SeeUm Nano Metal "TIRAMICS" Ceramics Coating

SeeUm Nano Tiramics Coating for all kind of Steel, Plating, Paint, Aluminum, Bronze Surface

We have developed the world's first semi-permanent coating ceramics that can be coated directly on the surface without sanding or primer work.
"Tiramics" is a new metal ceramic coating with flexibility, elasticity and high hardness properties that complements the disadvantages of regular ceramic coatings.
These new properties make the painted surfaces not to be cracked in sheet metal forming process such as "90˚ ~180 ˚ bending", "rolling", "laser cutting
& marking", therefore you can do direct coat it on the original sheet state without any processing, and you can also cure the sheet coated simply.
The coated surface can protect the surface from scratching with hardness of pencil of over 7h ~ 9h .
It has rust prevention , high gloss, slippery property, water repellent, UV blocking effect, anti-corrosive characteristics
and prevents adhesion of contaminants such as fingerprints, you can also easy clean the surface.
It can be applied to various material surfaces such as clear coat of vehicle paint, metal steel, stainless steel and aluminum wheel & sash, steel saw, steel knife, etc..





* It can be coated directly on the surface without sanding or priming work before coating, so you can save the work time and cost,
* and it can display the beautiful texture and color of the original material sheet luxurious.
* It provides semi-permanent duration with features such as rust prevention, severe chemicals, moisture, climate change, color discoloration, corrosion protection,
anti-pollution and UV protection.
* It has a high pencil hardness of 7h~9h or more, it keeps the surface luxurious as like a new product with high protecting from scratches for a long time.
* Since the coated surface is elastic and ductile, cracks do not occur in plastic working such as bending, rolling, laser cutting and marking of 90~180 degrees,
so you can apply it on the plate state of raw material.
* Scratch proof / Rust Protection, High heat / electrical conductivity
* The slippery surface, water repellent effect, and self cleaning effect reduce dust and pollutants, thus reducing the frequency of frequent cleaning.
* No sticking of foreign substances, graffiti, fingerprints, etc..
* It can be easily removed contaminants such as calcium, grease and oil.
* Prevent the occurrences of salt, moss, green algae, etc.
* Bugs such as insects and flies do not stick well.
* It can be applied to a variety of applications such as car clear coat, paint surface, metal steel, stainless steel, aluminum.
* No more waxing products or polishes are required.
* A small amount of 10~15 ml is enough to coat 1 square meter, which is cost-effective.



* Chemical Mixture : IPA dispersion, Multi-Hybrid, SiO, HSilicon Dioxide, Ethyl Silicate, etc.
* Color : Transparent
* Odor : Alcohol, Sour Odor.
* pH Value : 6.0~8.0 @20°C.
* Available Container : Any plastic bottle. 




== HOW TO USE ==

- DownLoad User Guide PDF -



+ Surface must be completely dried and cleaned.
+ Degrease with exclusive degreasing agent or ethanol, IPA.
+ If the surface is highly contaminated, clean it thoroughly with an alkaline detergent thoroughly
and remove the water using a high-pressure air gun or heater.



++ Applying Place : Dust free spraying booth ++

1.  Application :  Spray evenly on the surface using a low-pressure spray gun,
* Low volume low pressure (LVLP) spray guns also operate at a lower pressure (LP).
Spray Pressure : 1~2 Bar,   Spray Distance : About 15~20cm,   Consumption : 10~15ml / m2,

++ Curing Place : Dust free curing Oven ++
2. Heat Insulation Curing : Hour :  85°C : 1.5~2h     |      120°C : 1h     |    150°C : 0.5~1h.     |       
* After heat treatment, dry it at room temperature for 24 hours.
* After full curing, the thickness of a layer depends on the material and surface finish.
* Please clean the used spray gun with ethanol and IPA.




== TIRAMICS Technology Data ==





Unit of Measure



1 Liquid Coating



 Specific Gravity









 Alcohol, Slight Sour Odor



 Dust Free

Heat Insulation


 Heat Tem.




Car Paint Sample
Optimum temp is difference
for each material.​

 Hard drying

 1 ~ 1.5

 0.5 ~ 1


 Dry to touch




 Main Raw Materials




 Pencil Hardness

 6 ~ 9


 Aluminium (1T)

Glass (2T)

 Galvanized steel sheet (1.6T)



 10 ~ 15



 Surface Sanding



Except in particular cases


 Very Good

 Angle of water ≤ 110°










 Storage Stability




 Storage Temperature

 -10 ~ 10



 Coverage (Spray Coating)

 10 ~ 15



 Heavy Metals




 UV Blocking




 Application Method

Spray, Blush, Roller, Printer


Dust Free Spraying Booth 

 Use it when liquid is the same of

room temperature


 Chemical Resistance


 Salt Water(5%)

 1500 hrs

 Calcium Chloride(5%)

 24 hrs

 Hydrochloric Acid(2%)

 Liquid Ammonia(2%)


 Acid Detergent

Alkali Detergent







- Do not use thinner when degreasing.
- Do not work below 5℃.
- Do not mix the remaining liquid with the liquid storaged.
- Do not dilute with other products.
- Subdivide liquid as much as you use separately
- Wear protective equipment ( dust mask, safety goggles, protective glove, dustproof smocks) when you work.


::: CAUTIONS :::


- Be sure to follow the users instructions.
- Only use the product for its intended application.
- keep out of reach of children.
- Don’t drink and avoid eyes contact.
- If accidentally splashed in the eyes, flush immediately with water for at least 15 minutes.
- If accidentally swallowed, seek immediate medical attention by calling your local Poison Information Centre


::: STORAGE :::


Shelf Life : * Below -10℃ Freezing Storage : 1 Year   / * 15℃ Room Tem. : 3 Months.
- Avoid direct sunlight.
- When it was stored in the freezer, thaw it at room temperature, and then use it at 15 ~ 30 ℃






- Comparison with the coated side -


knife.jpg""        t1.jpg


t2.jpg        t3.jpg


t4.jpg        t5.jpg


- Widely, Variety of applications-








+ Rust prevention test +




+ 9h Pencil Hardness Test on Aluminium sheet +



+ 9h Pencil Hardness Test on Stainless steel sheet +



+ Stainless steel working of Tiramics Test +





++ Allied Items ++